Hi Mark Thorley that’s a good point about fabric shrinking. Martin Ball trimmers are probably aware of that fact but it might be worth him mentioning it to them.

Cheers,

Laurence

Might be worth noting. I have two different Tonneau covers.

One has the Velcro strip around the boot edge, but nothing on the inside of the car edge (no Velcro and no poppers). When fitted this tends to allow wind to get up under the Tonneau cover on the inside of the car edge, so I intend to fit female poppers on that edge myself (if I can find suitable that mate with the male studs).

The other has no Velcro strip, but has poppers on the boot edge and the inside of the car edge.

If you follow Alex’s note above, you’d end up with best of both worlds – Velcro around the boot edge and poppers on the inside of the car.

Laurence

Yes please Russ @russccptd-net , we could add that as a short article for others to read in the future (as these discussion posts get lower and lower on a list of 100s over time).

Laurence

Hi Gerben,

If you can hang on a few weeks it might be worth taking a look at what I’m hoping to introduce as stock in the Site Shop I’ve just launched.

Laurence

Trouble with EBay links are they get archived by eBay and disappear

Here is a couple of photos of the car Robin mentioned

I had these fitted to my grey can (still got a set of spacers somewhere from it)

Laurence

Thanks Mark for that bit of trivia – but…..

Who drive their jaguar most themselves in, say, the first 3 years of ownership.

Just a thought 🙂