XJS Soft Tops Club

Forum Replies Created

Viewing 4 replies - 1 through 4 (of 4 total)

Author

Replies
28th May 2025 at 11:55 in reply to: Where is the SHOP #20524

Peter Thomson
Participant

Hi Laurence

I would be more than happy to sign up for both sets of seals for 2 cabriolets I have. Also happy to help out with the tooling cost

Kind regards

Peter

25th March 2025 at 19:58 in reply to: WANTED : BAC 7742 & BAC 7743 #20472

Peter Thomson
Participant

Hi Pascal. I’m also in need of two sets of anyone knows of any

Kind regards

Peter

19th April 2024 at 16:16 in reply to: Cabriolet's Rear Side Window Rubbers replacement #20409

Peter Thomson
Participant

Hi Laurence & all,

Do you have any sets of the rear rubbers left? If not I would be keen to get them repeated if you can share the details. I am currently getting some of the Cabriolet soft top fixing bolts (the large pan head ones) made up and will have a few dozen spare that I can put through the shop if anyone is interested. Any from a breakers hard are normally well past their prime if you can get them out without chewing them up

Peter

2nd October 2023 at 19:42 in reply to: XJSC Hard top #20393

Peter Thomson
Participant

Thanks Laurence

I was being dense. There are three threaded mounting holes in the rear pillar when you remove the soft top mounting bracket. The third (bottom one) had never been used and was still covered in headlining and had been filled with glue from the factory (one side not threaded in true BL style….) The catches on the hard top fix with one bolt on each side to this bottom threaded hole. My car is off having its IRS rebuilt but when it is back I will post a series of photos to show the procedure.

If anyone knows what thread size these holes are (the same as the pan head soft top machine screws on the XJSC) it will make my life easier when I get my car back

Regards

Peter
Author

Replies

Viewing 4 replies - 1 through 4 (of 4 total)