Forum Replies Created
-
AuthorReplies
-
Adam SingletonParticipant
Hi Brian, yes, I’d like to purchase the latches you have at your asking price, plus postage. I’m based in Melbourne, Australia, so you may want to find out costs of postage first and then give me a final figure, or happy to “true up” postage costs either way? My direct email is xxxxxxx@xxx if we want to take this offline. Let me know how you’d like payment. Thank you, Adam
Adam SingletonParticipant@bbuxton, Hi Brian, I’d still be interested in the latches you mentioned in my post previously. Also, those covers you have shown in the pics above, if they are for sale, I’d be interested, as I do not have these for my car.
In answer to Keith’s questions above, I have just fitted a hard top to my car, which has never had a hard top before. I found that the bolts that fit the two holes of the C-pillar for the soft top, are also the bolts used to fit the hard top, although only 1 each side, not 2. As my car had never had a hard top, I had to pierce the C-pillar material for the 3rd holes and then gently screw the bolts in little by little, then out, then add a little wd40, then screw in a little further, and so on. Took a while but got the screws to fully screw in after a few minutes. I hope this helps.
🔍Adam SingletonParticipantThanks for pointing this out, Laurence. Hello Brian, I did source some hooks from an E-Type hardtop that have worked, but I would be interested in your latches. What price would you want to sell them for, and where are you located please? Regards, Adam
Adam SingletonParticipantHi Brian, thanks very much for the pics. They really help a great deal. I’ve taken the hardtop to an auto upholstery shop and I’m having a new headlining installed. I didn’t realise that the thick rubber is attached to the hardtop, so I will need to go back and show the craftsman how it should be attached. I’m also considering recovering the exterior, but it all comes down to whether the window will easily come out or not. And finally, I’m looking for replacement latches and the corresponding hooks that are bolted to the C-pillars in the Cab. Any tips on where to get a pair would be greatly appreciated. Thank you, Adam
Adam SingletonParticipantAdam SingletonParticipantHi Brian, those small hooks look like they would work, but from my understanding, the original “hooks” were a single bolt hole item. Oh, it’s quite interesting that there is so little documented information or photographs of the hard tops fitted with the original clamps, etc. Seems because these pieces are so hard to find, many are having to manufacture things to fit. I may be interested in the hooks you have. I just need to trial fit my hard top and see how far the reach is on the clamps, whether their adjustable screws on each side work correctly or whether the clamps in their current condition are too fragile to use. I really appreciate everything you’ve shared and I will come back to you once I know where I stand. I’m going to put another question on the forum about fitting the hard top, and where the rubbers go, if you have details to share on that too, please. Happy motoring. Thank you, Adam
Adam SingletonParticipantHi Brian, thanks for your reply mate. Yes, totally understand that you need yours. I took a punt as they were photographed on a sheet of white paper so hoped that they were a spare pair. It’s strange that there appears to be two types of latches used. Perhaps the ones with the eyelet bolt holes that you have were a UK delivered item, and the latches with the hooked ends were an export type. It appears that the latches I have are the same as a friend in the USA’s hardtop. He had to get the C-pillar attachments machined up. I may need to do the same. Appreciate your knowledge and advice. Thank you, Adam
Adam SingletonParticipantHi Brian, thanks very much for your reply. Yes, I have the two 2-No locating clips on the hardtop leading edge so all good there, as they are on my soft top. Not sure why a PO put a central clamp / clip on mine, but I will remove this before getting the headlining recovered.
It appears I am missing the connecting pieces that bolt to the side c-pillars to receive the hardtop “hooks” on each lower side. Are you by any chance selling these clips that you’ve shown in the pics? They seem to be slightly different hardtop connectors to the ones I have on this roof, and I can see the bolt holes that attach allow for attachment to the c-pillars in your pics. Regards, Adam -
AuthorReplies
