Gerben Haringsma

Forum Replies Created

Viewing 20 posts - 1 through 20 (of 58 total)
  • Author
    Posts
  • in reply to: targa rubbers ??? #15193
    Gerben Haringsma
      @gerbenharingsma

      and Laurence feasable ??

       

      in reply to: targa rubbers ??? #15025
      Gerben Haringsma
        @gerbenharingsma

        would appreciate update here whether it will be christmas 2019 ?

        regards,

        in reply to: Gearbox clonking #15023
        Gerben Haringsma
          @gerbenharingsma

          it is not about changing the oil,but a flush,to get all debris out of the very small canals and valves !

          changing the oil will not help at all.

          so my advise:flush/change filter/new oil.

           

          best regards

          in reply to: Gearbox clonking #14819
          Gerben Haringsma
            @gerbenharingsma

            have you ever flushed (cleaned) the gearbox ?

            it can lead to spectacular improvement.

            I had the same with my mercedes automatic after 120.000 km.

            after a quality flush, it was back to new.

            in reply to: targa rubbers ??? #14812
            Gerben Haringsma
              @gerbenharingsma

              who knows,where to buy targa rubbers ?

              in reply to: hardtop latches #14774
              Gerben Haringsma
                @gerbenharingsma

                hello Bryan,

                thanks very much..

                i need ALL  parts as i have NO hardware for fixing..

                so i understand you can supply the full “kit”.

                if so,please give me the amount including transport to Belgium please and

                your bankaccount details .

                my email:gerben.haringsma@gmail.com

                 

                in reply to: hardtop latches #14767
                Gerben Haringsma
                  @gerbenharingsma

                  to avoid confusions do need AALL ,including the hatches !!

                  in reply to: hardtop latches #14765
                  Gerben Haringsma
                    @gerbenharingsma

                    yes Bryan,

                    indeed; these are the ones !

                    you have them for sale please ?

                    is there also a ¨receiving¨part belonging to it ?

                    ould be very helpful to have a picture on how it is fixed !

                    sorry for the delay ,went to Spain with the XJS (and the wife)

                    the car performed beautifully.

                     

                    kind regards,Gerben

                    in reply to: Wanted – rubber seals for targa panels #14686
                    Gerben Haringsma
                      @gerbenharingsma

                      my targa roof is now starting to leak.

                      any idea whenn the new rubbers will be available Laurence ???

                      in reply to: xjs cabriolet targa top #13803
                      Gerben Haringsma
                        @gerbenharingsma

                        i repaired mine with a little block of brass and a file ?

                        in reply to: Cabriolet Hard Top catch question #13689
                        Gerben Haringsma
                          @gerbenharingsma

                          hi Doug,

                          could anyone send a picture of the mate please ??

                          would help a LOT.

                          thanks.

                          in reply to: Cabriolet Hard Top catch question #13688
                          Gerben Haringsma
                            @gerbenharingsma

                            hi Doug,

                            could not see the picture.?

                            please keep us informed as i think that i have the same problem and was thinking of making the mate

                            myself. is it correct to say that i would be mating thenn ?

                            in reply to: rust on the roof ! #13536
                            Gerben Haringsma
                              @gerbenharingsma

                              Photo 1395
                              Photo 1396
                              Photo 1397

                              in reply to: Wanted- front parking light bulb failure unit DAC1908 #13519
                              Gerben Haringsma
                                @gerbenharingsma

                                thanks.

                                it would be nice if one of the members,could suggest an easy alternative..

                                it is no rocket science.unfortunately i have no clue of electronics…….

                                in reply to: rust on the roof ! #13515
                                Gerben Haringsma
                                  @gerbenharingsma

                                  Photo 1393 does not existPhoto 1392 does not exist

                                  Photo 1394 does not exist

                                  in reply to: rust on the roof ! #13514
                                  Gerben Haringsma
                                    @gerbenharingsma

                                    Photo 1393 does not exist

                                    in reply to: rust on the roof ! #13512
                                    Gerben Haringsma
                                      @gerbenharingsma

                                      this picture thing is more difficult thenn the roof job !

                                      the roof has been recovered,the cut away rubber refilled,and as soon as dry,the trimming will be put back.

                                      also not an easy thing to do well !

                                      i tried to fit before the kit and there is no easy fit anymore.the chrome has to be re-bend at places,where you

                                      would think after all these years the shape should be fixed.allas no..

                                      the good thing is,that the new (very thin) fabric used,is coated with a thin layer of rubber.water cannot go through

                                      the fabric onto the paint/metal of the roof ! this puts my mind at ease for the future (a bit).

                                      in reply to: Wanted – rubber seals for targa panels #13435
                                      Gerben Haringsma
                                        @gerbenharingsma

                                        pity these rubbers are not available. would be handy !

                                        Gerben Haringsma
                                          @gerbenharingsma

                                          which company is that Alan ?

                                          in reply to: rust on the roof ! #13308
                                          Gerben Haringsma
                                            @gerbenharingsma

                                            Photo 1353 does not exist

                                          Viewing 20 posts - 1 through 20 (of 58 total)