Rear Window seals for a 1986 XJ-SC V-12

Viewing 5 reply threads
  • Author
    Posts
    • #1626
      Richard Hartwell
      Participant

      I am looking for a source for the rear fixed side window seals for my 86 V-12 SC along with my 85 and 86 euro model 6 cylinder version SCs. Any help would be appreciated.

      I am located in South Florida, USA

    • #1629
      Robin
      Participant

      Hi Richard,

      Just a courtesy reply as I’m in the UK and to be honest don’t remember seeing these available anywhere here or in Europe recently. Haven’t seen any new ones on eBay either only the front quarter light seals.

      These BAC7743 – LH & BAC7742 – RH aren’t available from Jag Heritage nor Targa panel seals..

      I’ll keep an eye open and if you find a source let me know as a useful item for future resprays..

      Most seals tend to be standard profiles cut & bonded to shape/length so I suppose possible to get batch made up worst case?

      Regards, Robin – Cheltenham, England

    • #1630
      Paul Forse
      Member

      Hi , I am also looking for the same seals , both sides . Paul 07888762068

    • #2350

      Hi Guys
      These seals have not been available for many years possibly 7 or 8 years ago in conjunction with JAGUAR CLASSIC PARTS I tried to get these and the early 3.6 header tanks re produced but the amount that were required to make the price acceptable was fat too many, so the plan was scrapped
      Regards
      Bleasie.

    • #2790
      Stephen J. Niznik
      Participant

      I have done an international search and there are none available as far as I could find. I am going to be making a set for my rear quarter light glass. If there is a need I will make as many sets as I can get buyers for. Members can let me know what they would be worth to them and I can assess the cost in material and time and move forward as the circumstances guide me.

      Stephen J. Niznik
      Also a member in long standing 12 years +/- at Jag.lovers

    • #2995

      Hi Stephen are you able to obtain the correct profile rubber, That was another problem I had, I managed to get a pair from a scrap car as a sample but could not find a supplier. To date most owners get the XJS ones & cut them to fit then super glue them back together.

Viewing 5 reply threads
  • You must be logged in to reply to this topic.
Scroll Up