- This topic has 10 replies, 3 voices, and was last updated 1 year, 9 months ago by Craig Shankland.
-
AuthorPosts
-
-
13th November 2018 at 17:35 #14691Gerben Haringsma@gerbenharingsma
Anyone having the hardtop latches for targa convertible for sale please ???
-
17th November 2018 at 15:55 #14714Bryan Thomas@bryan-thomas-1
<img src=”https://scontent.flhr3-1.fna.fbcdn.net/v/t1.0-9/42907686_2732300546796141_2578605017699188736_n.jpg?_nc_cat=103&_nc_ht=scontent.flhr3-1.fna&oh=7d79a373ac9e2006b3cba87e79c71510&oe=5C79CA5E” alt=”Image may contain: outdoor” /> Hi i have been making the parts that screw in for members is this what you need The 2 tabs that screw into the main latch
-
17th November 2018 at 18:34 #14719Bryan Thomas@bryan-thomas-1
-
17th November 2018 at 18:36 #14721Bryan Thomas@bryan-thomas-1
-
-
17th November 2018 at 16:12 #14716Bryan Thomas@bryan-thomas-1
<img src=””https://scontent.flhr3-1.fna.fbcdn.net/v/t1.0-9/42907686_2732300546796141_2578605017699188736_n.jpg?_nc_cat=103&_nc_ht=scontent.flhr3-1.fna&oh=7d79a373ac9e2006b3cba87e79c71510&oe=5C79CA5E” alt=”Image may contain: outdoor” />” alt=””https://scontent.flhr3-1.fna.fbcdn.net/v/t1.0-9/42907686_2732300546796141_2578605017699188736_n.jpg?_nc_cat=103&_nc_ht=scontent.flhr3-1.fna&oh=7d79a373ac9e2006b3cba87e79c71510&oe=5C79CA5E” alt=”Image may contain: outdoor” />” />
-
26th November 2018 at 11:01 #14765Gerben Haringsma@gerbenharingsma
yes Bryan,
indeed; these are the ones !
you have them for sale please ?
is there also a ¨receiving¨part belonging to it ?
ould be very helpful to have a picture on how it is fixed !
sorry for the delay ,went to Spain with the XJS (and the wife)
the car performed beautifully.
kind regards,Gerben
-
26th November 2018 at 11:05 #14767Gerben Haringsma@gerbenharingsma
to avoid confusions do need AALL ,including the hatches !!
-
26th November 2018 at 11:49 #14768Bryan Thomas@bryan-thomas-1
Hi Gerben The 2 pictures show the Parts top is the clip that fixes to hardtop with 2 small screws and the second picture is of part I make as original cast metal one breaks this part screws into the clip then you have the hole for fixing to the car into the hole below the 2 hood fixing holes I don’t have the clips for sale only the part that I make that screws in I sell these for £25 each Are you missing clips as well i can get the clips new but they’re expensive at £35 each to me to buy my email address is brycabriolets@sky.com contact me here with what you need regards Bryan
-
26th November 2018 at 16:42 #14771Bryan Thomas@bryan-thomas-1
Hi Gerben the picture on here is of my hard top its covered up for the winter The clips fit one each side and the screw part screws in each side i have now ordered 2 clips if you need them I would be able to supply 2 clips and 2 screw in parts if needed please email me Thanks Bryan
-
26th November 2018 at 20:08 #14774Gerben Haringsma@gerbenharingsma
hello Bryan,
thanks very much..
i need ALL parts as i have NO hardware for fixing..
so i understand you can supply the full “kit”.
if so,please give me the amount including transport to Belgium please and
your bankaccount details .
my email:gerben.haringsma@gmail.com
-
4th August 2020 at 19:31 #16319Craig Shankland@craig87xjsc
Looking for plastic replacement fasteners for the convertible top to latch into the roof rail….backside. any for sale anywhere, for my 87. cabriolet?
-
-
AuthorPosts
- You must be logged in to reply to this topic.