XJS Soft Tops Club

Owners Club for XJS Cabriolets and Convertibles

Cabriolet Targa Panel Mechanism – Info for an Article

Viewing 1 reply thread
  • Author
    Posts
    • 13th September 2023 at 23:13 #20359
      Laurence Jones
        @laurence_admin

        Hi All,

        I’ve been approached by a couple of members asking if I pull together an article around the locking mechanism found on the Targa Panels on the XJ-SC Cabriolet.

        I’m looking for the following assistance please :

        1/ photos of the Targa Panels with mechanics exposed

        2/ photos of the mechanism pieces

        3/ How you’ve repaired the link that breaks (pictures would help as well at details

        4/ any other related information that I can encorporate into an Article on the subject of these Targa Panels and there mechanisms.

        Let me know if you want to send anything to me via email

        Many thanks

        Laurence
        XJS Soft Tops Club

      • 29th September 2023 at 18:02 #20381
        Jim Hawk
          @jimandhelentalktalk-net

          Hi Laurence,

          I repaired the targa panel locking mechanism when I first bought the car over 23 years ago. The pin had pulled out of the sprung tab that locks the panel. Previous people had tried to weld it. My solution was to bend the rod slightly and then epoxy resin the rod in place. The kink in the rod gives you something for the epoxy to grip on, so the rod doesn’t just pull out. I avoided rapid epoxy as I always do.

          Hope this helps.

          Jim H Brighton UK 1984 XJSC 3.6 manual

          • 2nd October 2023 at 14:51 #20387
            Laurence Jones
              @laurence_admin

              Thanks Jim, I’ll add that to my article notes.

              Laurence

        • Author
          Posts
        Viewing 1 reply thread
        • You must be logged in to reply to this topic.