You have loads of parts that are in demand, mirrors dash , rad , put them on Ebay , you will get loads of money,whats the ski slop like & wood trim..switches , fues box , it is the little bits that add up.

Carbs!?

Hello Laurence, what’s the bonnet like, mines quite rusty from the underside?
Need the Crome centre front bumper,
Complete rear axle and cradle, preferably 3.54 with power lock,
5 speed manual gearbox and flywheel and clutch.
Manual pedal box, manual ski slope for centre consul.
If any of these parts are available please let me know+price. Malc

hi Laurence,
could use two mirrors.
for some strange reason,someone files part off,where it should touch the door on my car.
regards Gerben

Hi Laurence, I’m after a right rear mudflap. Something taken a nibble out of mine. Any luck?

Hi Laurence,
When you have a moment could you take a photo of the radio backing plate surround area. Yours might be in better condition than mine!
And thank you so much for sending the temperature dial and all your help on the phone. So much appreciated!
Best wishes,
Nigel

Hi Lawrence -that’s it – looks nicer than mine! How much are you after?
Regarding the temp gauge – I fitted yours and it was intermittent, so I refitted mine which was the same….
To cut a long story short which may help other members; it was the copper track within the plastic ‘circuit board’ which had broken where the plug goes in. I got hold of a piece of wire and spliced it into the plug end and also into the temp gauge screw (easy) and that did the trick.
While I was fiddling around, I broke the rev counter feed too, so did the same fix.
Incidentally, I checked both the gauges were working by applying 9v with a PP3 batters and both gave a full scale deflection which led me to look for another cause of the malfunction. Happy to keep it unless anyone else wants a temp gauge.
Hope this helps someone else!

Hi Laurence
I can use the ECU in the trunk (DAC3831) if it is still available

Richard in South Florida

Laurence
While there see if the radiator expansion tank is in good shape. My SC is a LHD so the tank sits on the driver’s wheel well
(of course being the passenger side on the RHD)

Hi Laurence
Just checking into see how you made out with the ECU and expansion tanks
Cheers
Richard

Hi,
I am after a front spoiler so is it for sale, and if so what price and condition is it in.
Regards
Alan

Photo 1196 does not exist

Hi Laurie, do you happen to have a spare wheel cover for the boot?  Also, did the XJSCs come with bags for the targa tops to store in the boot?

Regards

Martin

i knew you could help me!

please send.. although these rare parts are expensive and transportcosts prohibitive !

therefore only the right hand side one would do..

regards to Christina.

Hi Laurence, if you had wheel cover and the targa top bag then I am certainly interested.  Please let me know, cheers

Martin

Hi Laurence,

What’s the condition of your RHS front wing if it is still available.  I can see some rust but hopefully it is just on the surface.

Alan

Hi Laurence,

When you zoom into the larger picture of your XJS the area at the front edge of the RHS wing it looks quite good, but when you look close at the same area on the series of pictures you have posted later it seems to show some deterioration. Hopefully the garage pictures will show whether it is a solid panel or not.

Thanks

Alan

Hi Laurence,

The front edge looks to have dents, so I think I will try and look for one that is better.  Many thanks and I hope Paula is developing ok.

Alan

Hi Laurence,

Do you have any headlight adjuster brackets part No’s AA U1312 & AA U1313 . These are the spring loaded brackets for the single Auro headlight.  I would get away with just the bottom one AA U1313 but would buy a set of 3 if you have any.

Alan

…hi Laurence, how are you long time no hear…question is the engine stil avaleble? is it(was) it running?…then…. do you have the guide tube off the handbreake…you know the tub  the brake cabble is going tru…..a long time ago  a verry long time ago ( when i stil hat hair) yes yes thad long ago i shortned thet tube ….could not get the cable in….now i can use only 2 mm of my handbrake pats an than i have to renew….

Hi Laurence,

Please see my message about headlight adjusters + I need a parking light failure sensor that is situated in the passenger side well near the auxiliary fuses part No DAC1908.

Regards

Alan

ok thanks   Laurence,  that would by great