Reply To: Removing Cabriolet's black panel on 'B' pillar with the little leaper

#8336
Laurence Jones
    @laurence_admin

    Hi Gerben

    I’ve just been out and tried – it appears that there is a pin through the plate from the leaper’s tail into a locating grommet on the car. The leading edge of the plate is simply bonded to the car with a mastic – I gently prized the plate away from the bonding.

    Care – the backing plate is thin and prone to bending

    Once I removed my plates I found some rust behind, which will have to be treated before the plate with the leaper is returned to the car.

    Hope this helps,

    Laurence